Removing Snmp Traps - 3Com OfficeConnect 3CDSG10PWR User Manual

160 C 12: C
HAPTER ONFIGURING
Removing SNMP
Traps
SNMP
The SNMP Traps Setup Page contains the following fields:
Recipients IP Address — Defines the IP address to which the traps
■
are sent.
Community String — Defines the community string of the trap
■
manager.
Trap Version — Specifies the trap type. The possible field values are:
■
SNMP V1 — Indicates that SNMP Version 1 traps are sent.
■
SNMP V2c — Indicates that SNMP Version 2 traps are sent.
■
2 Define the relevant fields.
3 Click . The SNMP Traps are defined, and the device is updated.
The SNMP Traps Remove Page allows the network manager to remove
SNMP Traps.
Monitor users have no access to this page.
To remove SNMP traps:
1 Click Administration > SNMP > Traps > Remove. The SNMP Traps
Remove Page opens:
Figure 76 SNMP Traps Remove Page