Speed Reduction And Seating Function Inhibits - Invacare LiNX REM400 User's Manual Supplement

LiNX® Control System

6.15.3 Speed reduction and seating function inhibits

The mentioned speed reduction and seating function
limits do not apply to all Invacare wheelchair models.
Speed reduction
If the elevating seat has been adjusted above a certain point,
the drive electronics considerably reduces the speed of the
wheelchair. If speed reduction has been activated, drive
mode can only be used to carry out movements in reduced
speed and not for regular driving. To drive normally, adjust
the elevating seat until the speed reduction is deactivated
again.
Speed reduction is shown in the display. If the elevating seat
is raised above a certain point, an icon with an exclamation
point is displayed in the status bar. This indicator remains
active until speed reduction is deactivated again by lowering
the elevating seat.
66
Seating function inhibits
• Tilt limit
The maximum tilt limit switch is a function to prevent
the seat tilt or recline from extending beyond a
maximum pre-set angle, when the elevating seat is
raised above a certain point. The seating electronics
stops automatically, a grey exclamation point is
displayed on the seating screen and tilting or reclining
backwards is inhibited A.
According to that, an icon with a seat and an
exclamation point is displayed in the status bar. This
indicator remains active until the tilt limit is deactivated
by lowering the elevating seat.
60101834-C