Step Up - Invacare LiNX REM400 User's Manual Supplement

LiNX® Control System
• Perform emergency stop
Let Latch Drive Timeout expire.

6.6.3 3 Step Up

In this mode, you can step through one of three fixed
speeds. The speeds available are 33%, 67% and 100% of
the maximum pre-set reverse or forward speed A of the
selected drive screen and then remain at that speed for
the programmed Latch Drive Timeout period as long as no
further command is given.
Driving
1. Give drive command in desired direction (forward or
reverse).
2. Release drive command.
Wheelchair speed accelerates to 33% of the maximum
drive speed.
3. Give forward command when driving forward or reverse
command when driving in reverse to accelerate to next
fixed speed.
4. Release drive command.
New speed is held constantly.
48
Stopping
Use one of the following methods to stop:
• Give drive command in opposite direction (a reverse
command when driving forward or a forward command
when driving in reverse).
• Press external stop switch.
• Perform an emergency stop.
• Let Latch Drive Timeout expire.
6.6.4 5 Step Up
In this mode, you can step through one of five fixed speeds.
The speeds available are 20%, 40%, 60%, 80% and 100% of
the maximum pre-set reverse or forward speed A of the
selected drive screen and then remain at that speed for
the programmed Latch Drive Timeout period as long as no
further command is given.
60101834-C