Menu Select - Invacare LiNX REM400 User's Manual Supplement

LiNX® Control System

6.2.4 Menu select

With menu select, you perform both, the navigation and
the function screen selection.
Profile menu
To navigate the menus with menu select, you select a profile
from the profile menu and then select a function screen
from the function screen menu. Before making a selection,
you are free to move within the menus and free to move
between the menus (profile to function screen and vice
versa) as necessary.
Navigation entry
By default the indirect navigation is started via an external
switch, for example, an egg switch.
The indirect navigation can be started without an external
switch, via Stand by select, which must be enabled by your
provider. This means that the indirect navigation starts
36
Function screen menu
automatically after a period of time without user activity.
This period can be set by your provider.
There are two different ways, the indirect navigation is
entered:
• If the Navigation entry is set to First Profile, the menu
selection starts at the first profile in the profile menu.
You select a profile, before moving into the selected
profile's function screen menu. You can then either
select a function screen from the function screen menu
or return to the profile menu to select a different
profile.
If Navigation entry is set to Active User Function, the
•
menu selection starts at the currently selected function
screen in the function screen menu. From here you can
choose to navigate the function screen menu, select a
function screen or move up into the profile menu and
select a different profile.
60101834-C