The Sleep Mode; Operating Powered Seating Functions; Through Seating Screens - Invacare LiNX REM400 User's Manual Supplement

LiNX® Control System
If you do not apply the unlock sequence or the
ON/OFF button is pressed again before the unlock
sequence is complete, the system returns to the
locked state and powers down.

6.14 The sleep mode

The sleep mode is not set at the factory, but can be enabled
by your provider. If this parameter is set ON, the system
goes into sleep mode after a period of time without user
activity. This period can be set by the provider.
Before a system goes into sleep mode, the system enters a
transition period. During the transition period, the touch
display and all indicators slowly dim until they are switched
off.
During this transition period sleep mode can be interrupted
by performing any input by moving the joystick, pressing the
ON/OFF button or tapping on the touch display.
To wake the system from sleep mode, move the joystick or
either press the ON/OFF button, if this parameter has been
enabled by your provider.

6.15 Operating powered seating functions

Powered seating functions, such as powered elevating
legrests or powered recline, are carried out as described
below.
58

6.15.1 Through seating screens

By default, every seating screen displays a single
powered seating function. Different configurations
are listed below. Contact your provider to change
the configuration.
60101834-C