Cruise Control; Emergency Stop - Invacare LiNX REM400 User's Manual Supplement

• Perform emergency stop
• Let Latch Drive Timeout expire

6.6.7 Cruise Control

In this mode, you do not have fixed steps and can choose
the latched speed by yourself and then remain at that speed
for the programmed Latch Drive Timeout period as long as
no further command is given.
Driving
1. Give and hold drive command in direction (forward or
reverse) until wheelchair accelerates to desired speed.
2. Release drive command.
Wheelchair speed is held constantly.
3. If maximum drive speed A is not reached, give and
hold drive command again in same direction.
4. Release drive command.
New speed is held constantly.
60101834-C
5. Give drive command in opposite direction (reverse when
driving forward or forward when driving in reverse) to
decelerate speed.
6. Release drive command.
New speed is held constantly.
Stopping
Use one of the following methods to stop:
• Give drive command two times in same direction
quickly (less than one second)
• Press external stop switch
• Perform emergency stop
• Let Latch Drive Timeout expire

6.7 Emergency stop

If you press the ON/OFF button while driving, an emergency
stop is carried out. The remote powers down after this.
Usage
51