Using Indirect Navigation - Invacare LiNX REM400 User's Manual Supplement

The screen view focuses on the first function screen or
the last-used function screen in the profile depending
on how the programming is set up.
2. Tap on navigation button or wait for a few seconds to
activate selected function screen.
Using control input (CI)
A control input can be any external switch, for example, an
egg switch or a lip switch at a Sip and Puff Array.

6.2.3 Using indirect navigation

Indirect navigation is the ability to navigate through different profiles and function screens, independently from the touch display,
with the help of the active user input (for example, a head array).
By default, the indirect navigation is disabled. Contact your provider, if indirect navigation should be enabled.
Similar to the drive function, there is a difference between a three-quadrant (3Q) and a four-quadrant (4Q) operation.
User input type
4Q:
• Joystick
• Sip and Puff
• Sip and Puff Head Array
3Q:
• Head Array
• Four Switch Proximity Array
60101834-C
1. Short press to change function screen.
2. Long press to change profile.
No screen preview is displayed. The function screens change
and become active immediately.
Mapping for menu select
Left input: previous menu
Right input: select
Reverse input: next item in menu
Forward input: previous item in menu
Left input: select
Right input: next item in menu
Reverse input: disabled
Forward input (Four Switch Proximity
Array only): disabled
Mapping for scan select
Left input: select
Right input: select
Reverse input: select
Forward input: select
Left input: select
Right input: select
Reverse input: disabled
Forward input (Four Switch Proximity
Array only): disabled
Usage
35