•
If Navigation entry is set to Active User Function, the
currently selected function screen item is displayed on
the touch screen. If this function screen is not selected,
the system iterates once through the remaining function
screen items in the profile, wrapping around from the
last menu item to the first, if necessary. During this
single iteration, a function screen must be selected,
otherwise the menu reverts to the profile menu.
If the system reverts to the profile menu, the first item
in the profile menu is displayed on the touch screen. If
this item is not selected, the system iterates through
the profile menu until a profile is selected or until the
number of iterations is reached, at which point the
menu displays the idle state.
If a profile is selected before the system goes into
idle state, the system displays the first item in the
function screen menu. If this item is not selected, the
system iterates through the function screen menu until
a function is selected or until the number of iterations
is reached, at which point the menu displays the idle
state.
60101834-C
Scan select with 4Q or 3Q operation
User input type
4Q:
•
Joystick
•
Sip and Puff
•
Sip and Puff Head
Array
3Q:
•
Head Array
•
Four Switch Proximity
Array
Like in menu select, it is possible, to go back from function
screen menu to profile menu or close the profile menu.
The control navigation items are displayed in the scanning
Mapping for scan select
Left input: select
Right input: select
Reverse input: select
Forward input: select
Left input: select
Right input: select
Reverse input: disabled
Forward input (Four Switch
Proximity Array only):
disabled
Usage
41
Need help?
Do you have a question about the LiNX REM400 and is the answer not in the manual?
Questions and answers