Invacare LiNX REM400 User's Manual Supplement page 29

Interaction
60101834-C
Fig. 6-7
Entry Function
A Tap-Only Mode Toggle between tap mode and
swipe-and-tap mode
B Tap Zone
Defines the area used for detecting
a tap action on touch screen. It
sets the area around the point
of initial contact, within a tap is
recognized. Outside this area,
further, continuous contact will be
considered as a drag/swipe.
Recommendation:
•
•
Good dexterity →Low value
(small tap zone)
Poor dexterity → High value
(large tap zone)
This parameter does not
change the area around fixed
inputs (buttons, links, etc.). It
is solely for the area around
the first point of contact
when tapping or swiping.
Usage
29