External Stop Switch - Invacare LiNX REM400 User's Manual Supplement

LiNX® Control System
Each drive function can be assigned with a latched driving
mode by your provider. There are six latched driving modes,
which are indicated on the lower left of the drive screen
with the symbols displayed in the table below.
1 Step Up
3 Step Up
5 Step Up
3 Step Up/Down
46
5 Step Up/Down
Cruise Control
The Latch Drive Timeout period is restarted whenever
a subsequent drive command is given.
The Latch Drive Timeout is set by the provider. To
change the parameter, contact your provider.
Turn commands
The wheelchair can be steered while in latched driving
mode. If a turn command is given, the wheelchair remains
in latched driving mode and also responses to the turn
command for the duration that the turn command is given.
The Latch Drive Timeout period is restarted whenever a turn
command is given. When the Latch Drive Timeout expires,
the wheelchairs stops.

6.6.1 External stop switch

To set up a wheelchair for latched driving, an external stop
switch must be fitted to the wheelchair. Ideally, the external
stop switch should be highly visible and easily accessible to
provide an extra level of safety and security for the user.
60101834-C