The Sleep Mode; Operating The Powered Seating Adjustments - Invacare LiNX DLX-REM110 User Manual

Unlocking the remote
Press the ON/OFF key A.
1.
Press the horn B twice within ten seconds.
2.
If you implement the unlock sequence incorrectly or press the
ON/OFF key again before the unlock sequence is complete, the
system returns to the locked state.
During an unlock attempt, the battery gauge indicates the system is in
a locked state by flashing LEDs red, amber and green (far left, middle
1602969-B
and far right) until either the system is powered off, unlocked or
the Sequence Timeout is reached.
If an attendant dual control (DLX-REM50) is used, it is
locked or unlocked, too.
You can also lock and unlock the system via the attendant
dual control. When unlocking the system via the attendant
dual control, the attendant dual control is in charge
automatically.

3.5 The sleep mode

The sleep mode is no factory setting, but can be enabled by your
provider. If this parameter is set On, the system goes into sleep
mode after a period of time without user activity. This period of
time can be set by the provider.
To wake the system from sleep, either press the ON/OFF key or
move the joystick, if this parameter has been enabled by the provider.

3.6 Operating the powered seating adjustments

Powered seating adjustment options, such as powered elevating
legrests or an powered recline, are carried out as described below.
Usage
17