Table of Contents
Advertisement
Invacare® LiNX
Gentler Rate
1. Give short drive demand, less than one second, in
opposite direction (a reverse demand when driving
forwards or a forward demand when driving in reverse)
or
let Latch Drive Timeout expire.
Interrupting Deceleration
When slowing down or stopping (except for an emergency
stop or control input configured for a stop), the deceleration
can be interrupted to resume driving.
1. Give drive demand for accelerating before speed has
reached zero, so speed accelerates to nearest higher
fixed speed.
5.8.7 Cruise Control
In this mode, you do not have fixed steps and can choose
the latched speed by yourself and then remain at that speed
for the programmed Latch Drive Timeout period as long as
no further demand is given.
56
Fig. 5-73
Accelerating/Decelerating
1. Give and hold drive demand in direction (forward or
reverse) until wheelchair accelerates to desired speed.
2. Release drive demand.
Wheelchair speed is held constantly.
3. If maximum drive speed A is not reached, give and
hold drive demand again in same direction.
4. Release drive demand.
New speed is held constantly.
5. Give drive demand in opposite direction (reverse when
driving forwards or forward when driving in reverse)
to decelerate speed.
6. Release drive demand.
New speed is held constantly.
Interrupting Deceleration
When slowing down or stopping (except for an emergency
stop or control input configured for a stop), the deceleration
can be interrupted to resume driving.
1. Give drive demand for accelerating before speed has
reached zero, so speed accelerates to whatever point
demand is released.
Stopping
Apart from using an emergency stop or a control input
configured for a stop, there are different ways to stop the
mobility device.
1637425-I
Advertisement
Table of Contents
