External Stop Switch - Invacare LiNX DLX-REM500 User Manual

Invacare® LiNX
5 Step Up/Down
Cruise Control
The Latch Drive Timeout period is restarted whenever
a subsequent drive demand is given.
The Latch Drive Timeout is set by the provider. To
change the parameter, contact your provider.
Turn demands
The wheelchair can be steered while in latched driving
mode. If a turn demand is given, the wheelchair remains
in latched driving mode and also responses to the turn
demand for the duration that the turn demand is given. The
Latch Drive Timeout period is restarted whenever a turn
demand is given. When the Latch Drive Timeout expires,
the wheelchairs stops.

5.8.1 External stop switch

To set up a wheelchair for latched driving, an external stop
switch must be fitted to the wheelchair. Ideally, the external
stop switch should be highly visible and easily accessible to
provide an extra level of safety and security for the user.
50
External stop switch test
The external stop switch test checks that the external stop
switch is functioning correctly. The test is conducted once
per power cycle when:
• the wheelchair is powered up in a latched drive mode
function or
• a latched drive mode function is selected following a
non-latched mode function.
The external stop switch test is indicated by a screen overlay.
1. Press external stop switch to complete test.
The wheelchair does not drive until the external stop
switch test is completed successfully.
1637425-I