Table of Contents
Advertisement
Chapter 2 Getting Started — Attaching/removing the projection lens (optional)
f The lens hood needs to be mounted to the projector when an interchangeable projection lens is used under the condition that throw ratio is
greater than 3.0 in the North America region. Always ask a qualified technician or your dealer to mount the lens hood.
The throw ratio described here is a value calculated by dividing the actual projection distance by the projected image width.
The lens hood is assembled and mounted to the projector using the following supplied components.
Lens hood 1, Lens hood 2, Lens hood mounting plate 1, Lens hood mounting plate 2, Lens hood screws, Knurled head screws
For the assembly and attachment, refer to the separate document "Mounting the lens hood".
The components and document of the lens hood may not be supplied depending on the country or region where you purchased the product.
Removing the projection lens
Remove the projection lens using the following procedure.
Lens hole cover
1)
Remove the lens fixing screw.
f Use a Phillips screwdriver to remove the first screw to the right of the mark on the projection lens (orange).
2)
Remove the projection lens by turning it counterclockwise while pressing the lens release button.
(Fig. 1)
f Turn the projection lens counterclockwise until the mark on the projection lens (orange) is aligned with the
mark on the projector (E on the left side of LOCK).
f Proceed to Step 3) when carrying or storing the projector.
3)
Attach the supplied lens hole cover. (Fig. 2)
f Insert the lens hole cover by aligning the mark on the lens hole cover (E) with the mark on the projector (E
on the left side of LOCK) and turn clockwise until it clicks.
4)
Secure the lens hole cover. (Fig. 3)
f Use a Phillips screwdriver to tighten the screw fixing the lens hole cover.
Note
f Some lenses may not have a screw hole to use to secure the projection lens.
Attention
f Store the removed projection lens where it will be free from vibration and impact.
f Store the removed lens fixing screw in a safe place.
56 - ENGLISH
Lens release button
Fig. 1
Fig. 2
Screw
Fig. 3
Advertisement
Table of Contents
