Table of Contents
Advertisement
[ENABLE/DISABLE]
[NONE]
*1 These items can be selected in following case.
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30,
ET-D75LE40) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10), or when a projection lens
with the stepping motor is attached.
f The setting can be also made by pressing as to select the channel, pressing the <ENTER> button to
display the item list, pressing asqw to select the item, and pressing the <ENTER> button.
f Same item cannot be set for multiple channels, except for [NONE].
Note
f Assign each item of [LENS H SHIFT MSB], [LENS V SHIFT MSB], [LENS FOCUS MSB], and [LENS ZOOM MSB] to a channel together
with [LENS H SHIFT LSB], [LENS V SHIFT LSB], [LENS FOCUS LSB], and [LENS ZOOM LSB]. These cannot be used when assigned to a
channel by itself.
f Assign each item of [LENS H SHIFT LSB], [LENS V SHIFT LSB], [LENS FOCUS LSB], and [LENS ZOOM LSB] to a channel together with
[LENS H SHIFT MSB], [LENS V SHIFT MSB], [LENS FOCUS MSB], and [LENS ZOOM MSB]. These cannot be used when assigned to a
channel by itself.
f MSB: Most Significant Byte
f LSB: Least Significant Byte
[Art-Net STATUS]
Display the content of control assigned to each channel and the received data of that channel.
1)
Press as to select [Art-Net STATUS].
2)
Press the <ENTER> button.
f The [Art-Net STATUS] screen is displayed.
206 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Enables/disables the control of the projector with the Art-Net function.
No definition
Advertisement
Table of Contents
