Table of Contents
Advertisement
[STARTUP LOGO]
Set the logo display when the power is turned on.
1)
Press as to select [STARTUP LOGO].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT LOGO]
[USER LOGO]
[NONE]
Note
f When [USER LOGO] is selected, the display of the startup logo will be kept for approximately 15 seconds.
f To create and register the [USER LOGO] image, use "Logo Transfer Software". The software can be downloaded from the Panasonic
website (https://panasonic.net/cns/projector/).
[UNIFORMITY]
Correct the brightness unevenness and color unevenness of the whole image.
Setting [GRADIENT CORRECTION]
Correction is performed in vertical and horizontal directions to approach the even condition when unevenness in
one direction is occurring throughout the whole image.
1)
Press as to select [UNIFORMITY].
2)
Press the <ENTER> button.
f The [UNIFORMITY] screen is displayed.
3)
Press as to select [WHITE], [RED], [GREEN], or [BLUE].
4)
Press qw to adjust the level.
Item
[VERTICAL]
[HORIZONTAL]
Setting [FLEXIBLE CORRECTION]
Correct the topical brightness unevenness and color unevenness using the correction value in the projector.
1)
Press as to select [UNIFORMITY].
2)
Press the <ENTER> button.
f The [UNIFORMITY] screen is displayed.
3)
Press as to select [FLEXIBLE CORRECTION].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays the Panasonic logo.
Displays the image registered by the user.
Disables the startup logo display.
Operation
Press w.
Press q.
Press w.
Press q.
Adjustment
The lower-side color becomes
pale, or the upper-side color
becomes dark.
The upper-side color becomes
pale, or the lower-side color
becomes dark.
The left-side color becomes pale,
or the right-side color becomes
dark.
The right-side color becomes
pale, or the left-side color
becomes dark.
Range of adjustment
-127 - +127
ENGLISH - 151
Advertisement
Table of Contents
