Table of Contents
Advertisement
[4K/30p/HDR]
[4K/30p/SDR]
[2K]
[4K/60p]
Note
f Switch the setting to [4K/30p/HDR] or [4K/30p/SDR] when proper image is not projected while [EDID SELECT] is set to [4K/60p] and the 4K
video signal is input.
f Switch the setting to [2K] when proper image is not projected while [EDID SELECT] is set to [4K/60p], [4K/30p/HDR], or [4K/30p/SDR] and
the 2K video signal or lower is input.
f For details of the signal described in EDID of [4K/60p], [4K/30p/HDR], [4K/30p/SDR], or [2K], refer to "List of plug and play compatible
signals" (x page 261).
Setting [EDID MODE] in [DIGITAL LINK IN]
1)
Press as to select [DIGITAL LINK IN].
2)
Press the <ENTER> button.
f The [DIGITAL LINK IN] screen is displayed.
3)
Press as to select [EDID MODE].
4)
Press the <ENTER> button.
f The [DIGITAL LINK EDID MODE] screen is displayed.
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[USER]
f Proceed to Step 10) when [DEFAULT] is selected.
6)
Press the <ENTER> button.
f The [RESOLUTION] screen is displayed.
7)
Press asqw to select [RESOLUTION].
f Select [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p],
[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], [1920x1200p],
[2048x1080p], [2560x1600p], or [3840x2400p].
8)
Press the <ENTER> button.
f The [VERTICAL SCAN FREQUENCY] screen is displayed.
9)
Press qw to select [VERTICAL SCAN FREQUENCY].
f The setting is fixed to [30Hz] when [3840x2400p] is selected for [RESOLUTION].
f Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [2048x1080p] or [1920x1080p] is selected for
[RESOLUTION].
f Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
f Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].
g [3840x2400p], [2048x1080p], [1920x1080p], [1920x1080i]
10) Press the <ENTER> button.
f The confirmation screen is displayed.
11) Press qw to select [OK], and press the <ENTER> button.
Note
f The settings in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] are displayed in [EDID STATUS].
Chapter 4 Settings — [DISPLAY OPTION] menu
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 30 Hz).
This is EDID supporting HDR (High Dynamic Range).
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 30 Hz).
This is EDID supporting SDR (Standard Dynamic Range). This does not support HDR (High Dynamic
Range).
Switches to EDID corresponding to the 2K video signal (maximum 1 920 x 1 200 dots) or lower.
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 60 Hz).
Standard setting.
Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
ENGLISH - 133
Advertisement
Table of Contents
