Table of Contents
Advertisement
2)
Press qw or the <ENTER> button.
f The [SYSTEM DAYLIGHT VIEW] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1] - [6]
[SHARPNESS]
You can adjust the sharpness of the projected image.
1)
Press as to select [SHARPNESS].
2)
Press qw or the <ENTER> button.
f The [SHARPNESS] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Operation
Press w.
Press q.
Note
f If you press w while the adjustment value is [+15], the value will become [0]. If you press q while the adjustment value is [0], the value will
become [+15].
[NOISE REDUCTION]
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1)
Press as to select [NOISE REDUCTION].
2)
Press qw or the <ENTER> button.
f The [NOISE REDUCTION] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1] - [6]
Attention
f When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].
[DYNAMIC CONTRAST]
Light adjustment of the light source and signal compensation are performed automatically according to the image
to make the contrast optimum for the image.
1)
Press as to select [DYNAMIC CONTRAST].
2)
Press qw or the <ENTER> button.
f The [DYNAMIC CONTRAST] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1]
[2]
[3]
[USER]
104 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
No correction.
Corrects the vividness of the image. The larger the value, the stronger the correction.
Adjustment
Contours become sharper.
Contours become softer.
No correction.
Compensates the noise. The larger the value, the stronger the compensation of the noise.
Disables the dynamic contrast function.
Adjusts the light source and compensates signals to a small extent.
Adjusts the light source and compensates signals to a moderate extent.
Adjusts the light source and compensates signals to a large extent.
Set any desired correction.
Refer to "Performing desired correction" (x page 105) for details.
Range of adjustment
0 - +15
Advertisement
Table of Contents
