Table of Contents
Advertisement
f When [SDI LINK] is set to [AUTO], use the same format for the signal to be input to the <SDI IN 1>/<SDI IN 2>/<SDI IN 3>/<SDI IN 4>
terminals. If different format signal is input to even one terminal, currently displayed image may not be projected correctly.
f [3G-SDI MAPPING] cannot be set when [SDI LINK] is set to [AUTO].
f The content set is displayed in [SDI LINK SETTINGS].
Setting [RESOLUTION] in [SDI IN]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
f When [QUAD LINK SETTING] is selected, proceed to Step 5).
4)
Press as to select [SDI1], [SDI2], [SDI3], [SDI4], [SDI1-2], or [SDI3-4], and press the <ENTER> button.
f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed.
5)
Press as to select [RESOLUTION], and press the <ENTER> button.
f The [RESOLUTION] screen is displayed.
6)
Press as to select an item, and press the <ENTER> button.
f Select [AUTO], [720x480i], [720x576i], [1280x720p], [1920x1080i], [1920x1080p], [1920x1080sF], or
[2048x1080p] when [SINGLE LINK SETTING] is selected.
f Select [AUTO], [1920x1080i], [1920x1080p], [1920x1080sF], [2048x1080p], [3840x2160p], or [4096x2160p]
when [DUAL LINK SETTING] is selected.
f Select [AUTO], [3840x2160p], [3840x2160sF], or [4096x2160p] when [QUAD LINK SETTING] is selected.
Setting [4K DIVISION] in [SDI IN]
Set the transmission method in the 4K division when 4K image is displayed with SDI input.
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [DUAL LINK SETTING] or [QUAD LINK SETTING], and press the <ENTER> button.
f The [DUAL LINK SETTING] screen or the [QUAD LINK SETTING] screen is displayed.
f When [DUAL LINK SETTING] is selected, press as to select [SDI1-2] or [SDI3-4], and press the
<ENTER> button.
4)
Press as to select [4K DIVISION].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[SQUARE]
[INTERLEAVE]
Setting [3G-SDI MAPPING] in [SDI IN]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically select [SQUARE] or [INTERLEAVE].
Fixes the transmission method to Square Division.
Fixes the transmission method to 2-Sample Interleave Division.
ENGLISH - 129
Advertisement
Table of Contents
