Table of Contents
Advertisement
[FADE-IN]
[FADE-OUT]
Note
f Press the <SHUTTER> button on the remote control or the control panel during fade-in or fade-out to cancel the fade operation.
Setting [STARTUP]
Automatically enable/disable the shutter function (shutter: closed/open) when the power is turned on.
1)
Press as to select [SHUTTER SETTING].
2)
Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3)
Press as to select [STARTUP].
4)
Press qw to switch the item.
[OPEN]
[CLOSE]
Setting [SHUT-OFF]
Automatically open/close the mechanical shutter when the power is turned off.
1)
Press as to select [SHUTTER SETTING].
2)
Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3)
Press as to select [SHUT-OFF].
4)
Press qw to switch the item.
[KEEP CURRENT STATE]
[OPEN]
[CLOSE]
Setting the shutter synchronization function
The shutter synchronization function is a function to synchronize the shutter operation of the specified projector
to other projectors, and the effect using the shutter function including the fade in/fade out operation can be
synchronized.
To use the shutter synchronization function, it is necessary to connect the projectors targeted for synchronization
in a loop with daisy chain connection using the <MULTI PROJECTOR SYNC IN> terminal and the <MULTI
PROJECTOR SYNC OUT> terminal. For details of how to connect the projectors, refer to "Connecting example
when using the contrast synchronization function/shutter synchronization function" (x page 64).
1)
Press as to select [SHUTTER SETTING].
2)
Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3)
Press as to select [MULTI PROJECTOR SYNC].
4)
Press the <ENTER> button.
f The [MULTI PROJECTOR SYNC] screen is displayed.
Chapter 4 Settings — [DISPLAY OPTION] menu
Item
[OFF]
[0.5s] - [10.0s]
The projector goes into projection mode with the shutter function disabled (shutter: opened) when the
power is turned on.
The projector goes into projection mode with the shutter function enabled (shutter: closed) when the
power is turned on.
The projector goes into standby mode with the condition of the mechanical shutter maintained when
the projector is switched off.
The projector goes into standby mode with the mechanical shutter opened when the projector is
switched off.
The projector goes into standby mode with the mechanical shutter closed when the projector is
switched off.
Adjustment
Does not set fade-in or fade-out.
Sets the fade-in or fade-out time.
Select an item from [0.5s] - [4.0s], [5.0s], [7.0s], or [10.0s]. [0.5s] -
[4.0s] can be selected in increments of 0.5.
ENGLISH - 153
Advertisement
Table of Contents
