Brother MFC5890CN Service Manual page 195

Assembling Notes:
• When mounting the MJ/PS shield unit onto the lower cover, route the power supply
harness through the U-shaped cutout (shown on the previous page) provided in the lower
MJ/PS shield.
After mounting the MJ/PS shield unit, route the power supply harness through the channel
and route the main-MJ (EXT) harness and main-MJ (LINE) harness on the left side of the
lower cover as shown below.
Carriage motor harness
ASF motor harness
Main-MJ (LINE) harness (yellow)
6-40
Main-MJ (EXT) harness (black)
Paper feed motor harness
Power supply harness
Channel
Main PCB
PF encoder/registration
sensor harness
(6_49_BHL9_A3)
Confidential