Brother MFC5890CN Service Manual page 218

Hide thumbs Also See for MFC5890CN:
Table of Contents

Advertisement

ASF motor
(5) Unlatch the shaft holder and remove it from the maintenance unit.
(6) Remove the idle gear 16 and the ASF/maintenance drive gear.
(7) Remove the ASF motor from the maintenance unit by removing the two screws.
(8) Disconnect the ASF motor/encoder harness from the ASF motor.
ASF/maintenance
drive gear
ASF motor/encoder
harness
Assembling Note: When mounting the ASF motor on the maintenance unit, first fit the
small hole of the ASF motor on the small boss inside the ASF motor holder, then secure the
motor with the two screws.
Shaft holder
Screw, pan
(s/p washer)
M3x5
6-63
Latch
Idle gear 16
Maintenance
unit
ASF motor
(6_71)
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc5895cw

Table of Contents