Brother MFC5890CN Service Manual page 171

Document pull-in/separation roller ASSY, separation rubber and plate
(7) At the rear end of the shaft of the document pull-in/separation roller ASSY, release the lock
arm of the bushing from the hole provided in the ADF drive unit and turn it up. Pull the
document pull-in/separation roller ASSY up and out of the upper ADF chute.
NOTE: Take care not to drop the bushing at the front end of the roller shaft.
(8) Lightly pull up the left end of the separation pad and out of the upper ADF chute together
with the separation rubber.
Lock arm of bushing
Separation rubber
Separation plate
Assembling Note: When putting the separation plate and its rubber back into place, fully
insert the plate until the cutout becomes fitted over the boss on the upper ADF chute.
ADF drive unit
Cutout
Upper ADF chute
6-16
Document pull-in/
separation roller ASSY
Bushing
(Front)
(6_14)
Confidential