Brother MFC5890CN Service Manual page 226

PE actuator
(25) Lift up the front end of the PE actuator as shown below. Using the spring hook or the like,
release the long end of the PE actuator spring from the groove provided in the PE actuator,
and then remove the spring.
Note: When releasing the spring, hold it taking care not to let the spring bounce off.
(26) Pull the PE actuator outward at the point connected with the gear holder, release its bosses
from the gear holder, and take it off.
Spring hook
PE actuator spring
Engine unit
(placed upside down)
PE actuator
Long end of the
PE actuator spring
Bosses
G
ear
er
hold
6-71
PE actuator
(PE actuator_1)
Confidential