Husqvarna P 535HX Operator's Manual page 47

To clean the cold air intakes
CAUTION:
daily or more frequently if necessary. A
blocked cold air intake can make the product
become too hot.
To clean the cold air intake of the battery
cooling system
• Make sure that the cold air intake grille is not
blocked. Remove grass and dirt with a soft brush.
To clean the cold air intake of the right side
cover
• Make sure that the cold air intake grille is not
blocked. Remove grass and dirt with a soft brush.
To clean the cold air intake of the engine
• Make sure that the cold air intake grille is not
blocked. Remove grass and dirt with a soft brush.
1591 - 005 - 20.05.2021
Clean the cold air intakes
To clean the battery cooling system
1. Remove the cover to the battery cooling system.
To remove the cover of the battery cooling
Refer to
system on page 48 .
2. Use compressed air to clean the cooling fins and the
filters on the sides of the cover.
To clean the engine and the muffler
Keep the engine and muffler free from grass cuttings
and dirt. Grass cuttings soaked in fuel or oil on the
engine can increase the fire risk and the risk that the
engine becomes too hot. Let the engine cool before it is
cleaned. Clean with water and a brush.
Grass cuttings around the muffler dry quickly and are a
fire risk. Use a brush or remove the grass cuttings with
water when the muffler is cold.
To remove the covers
To remove and install the front cover of the
steering column
1. Remove the 2 screws and tilt the front cover of the
steering column forward.
2. Disconnect the wires.
47