Husqvarna P 535HX Operator's Manual page 23

2. Make sure that the forward
pedal and rearward pedal
are not blocked and can be
operated freely.
3. Push the forward pedal
carefully to move forward.
4. Release the forward pedal to
brake. Make sure that the
brake engages when the
forward pedal is released.
Note: The product has an
automatic brake that
engages when you release
the pedals. For more brake
power when you decrease
the speed, push the other
pedal.
5. Do the same procedure for
the rearward pedal.
Parking brake
The product has a manual
parking brake and an automatic
parking brake. The automatic
parking brake engages when
the product is stationary.
WARNING: The
automatic parking brake
is not sufficient to park
the product safely. Do a
check of the manual
parking brake daily and
adjust it if it is necessary.
1591 - 005 - 20.05.2021
To do a check of the parking
brake
1. Put the product in a level
position.
2. Apply the parking brake.
3. Do a check of the front
parking brake. Make sure
that the spring is not
damaged and correctly
attached.
4. Remove the transmission
cover. Refer to
the transmission cover on
page 49 .
To remove
23