Husqvarna P 535HX Operator's Manual page 32

Hide thumbs Also See for P 535HX:
Table of Contents

Advertisement

Available languages

Available languages

Push the time, language and system symbol.
Note:
This symbol shows on the display when the
product is stationary for more than 6 seconds.
To set the time on the display
1. Push the symbol for time, language and system on
the display.
2. Push the time symbol.
3. Push "24h" or "12h" to set the time format.
4. Push the "+" or "-" to set the hours and minutes.
To select language
1. Push the symbol for time, language and system on
the display.
2. Push the language symbol.
3. Push a language.
To see system information and to do a factory reset
1. Push the symbol for time, language and system on
the display.
2. Push the symbol for system information.
3. Push "factory reset" to reset time and language.
To adjust the brightness of the display
1. Push the brightness symbol on the display.
32
2. Push the "+" or "-" to adjust the brightness of the
display.
To connect the power supply
(accessory)
WARNING:
or a defective power supply can cause an
electrical shock, overheating or battery
leakage. Regularly examine that the power
supply and the batteries are not damaged.
CAUTION:
supply in conditions where temperatures are
below 0°C or above 40°C.
Connect the power supply to a grounded mains
socket and to the product.
To fill fuel
WARNING:
flammable. Be careful and refuel outdoors.
Fuel safety on page 20 .
Refer to
WARNING:
a support area.
An incorrectly used, broken
Do not use the power
Diesel fuel is very
Do not use the fuel tank as
1591 - 005 - 20.05.2021

Advertisement

Table of Contents
loading

Table of Contents