Husqvarna P 535HX Operator's Manual page 63

Display - Troubleshooting
Symbol
Critical error
Engine is too hot
Oil pressure low
Generator fault
Hybrid mode dis-
12 V battery level
48 V batteries
level indicator
Battery tempera-
ture indicator
Preheating bat-
1591 - 005 - 20.05.2021
Shows on the
Name
display
The symbol and
information text
shows.
The symbol
shows.
The symbol
shows.
The symbol is
yellow.
indicator
The symbol is
red.
The symbol
shows.
abled
The symbol
indicator shows.
The symbol is
white.
The symbol is
yellow.
The symbol is
red.
The symbol
shows.
The symbol
tery shows.
Cause / Action
Press the information button to enter the troubleshooting
menu. If there is a parking brake fault, do a check of the
electric parking brake cable. Refer to
the electric parking brake on page 24 .
Speak to your Husqvarna servicing dealer if the problem
stays.
Operate the product to where you can park safely. Press
the Information button to access the troubleshooting
menu. If it shows no action, speak to your Husqvarna
servicing dealer.
Operate the product to where you can park safely. Press
the Information button to access the troubleshooting
menu. If the hydraulic control unit is overheated, clean
the air intake and wait for the control unit to cool down.
The engine temperature is too high.
Speak to your Husqvarna servicing dealer if the problem
stays.
The oil pressure is low. Do not use the product and
speak to your Husqvarna servicing dealer.
The 48 V generator is too hot.
The 48 V generator has a fault.
Speak to your Husqvarna servicing dealer.
To charge the 12 V battery on
Low voltage. Refer to
page 59 .
The batteries level is in the correct range.
The batteries level is low.
The batteries are empty.
The 48 V batteries are too cold.
Preheating of 48 V batteries are running.
To do a check of
63