Husqvarna P 535HX Operator's Manual page 24

5. Do a check of the rear
parking brake. Make sure
that the spring is not
damaged and correctly
attached.
6. Install the transmission
cover.
To do a check of the electric
parking brake
1. Set the main switch to OFF.
To stop the product
Refer to
on page 35 .
2. Remove the service hatch.
To remove the
Refer to
service hatch on page 48 .
24
3. Examine the parking brake
cables for damage. Make
sure that the cable pins are
correctly installed in the
connector.
4. Install the service hatch.
5. Set the main switch to ON.
To start the product
Refer to
on page 34 .
6. Park the product on a hard
surface that slopes, keep the
product on.
WARNING: Do not
park the product on a
grass slope when you
do a check of the
electric parking brake.
7. Make sure that the product
cannot move. If the product
starts to move, contact an
approved service agent.
1591 - 005 - 20.05.2021