Husqvarna P 535HX Operator's Manual page 21

risk that fuel leaks or fumes
can cause damage.
• Drain off the fuel in an
approved container outdoors
and away from naked flames.
Safety devices on the product
WARNING: Read the
warning instructions that
follow before you use the
product.
• In this section the product's
safety features, its purpose
and how checks and
maintenance should be
carried out to ensure that it
operates correctly. See
instructions under the
Product overview on
heading
page 3 to find where these
parts are located on your
product.
• The life span of the product
can be reduced and the risk
of accidents can increase if
product maintenance is not
carried out correctly and if
service and/or repairs are not
carried out professionally. If
you need further information
please contact your nearest
servicing dealer.
• Never use a product with
defective safety components.
The product's safety
equipment must be inspected
1591 - 005 - 20.05.2021
and maintained as described
in this section. If your product
fails any of these checks,
contact your service agent to
get it repaired.
• All servicing and repair work
on the product requires
special training. This is
especially true of the product
's safety equipment. If your
product fails any of the
checks described below you
must contact your service
agent. When you buy any of
our products we guarantee
the availability of professional
repairs and service. If the
retailer who sells your product
is not a servicing dealer, ask
him for the address of your
nearest service agent.
To do a check of the power key
switch and the start buttons
1. Park the product on a level
surface.
2. Start the product. Refer to
To start the product on page
34 .
3. Make sure that the display
comes on when you turn the
power key to the ON
position.
21