Table of Contents
Advertisement
Trimming Recorded Clips
You can extract (trim) the necessary parts of a clip
recorded in the SD card.
The trimmed clip is saved as a new file on the same
SD card as the original clip. No changes are made
to the original clip.
.
1 Switch to Media mode.
Switch the mode using the [CAM/MEDIA]
selection button on the side operation panel.
2 Move the cursor to the clip to be trimmed.
Move the cursor to the clip to be trimmed using
the cross-shaped button (JKH I).
.
3 Press the [LOAD FILE/3] button.
The action selection screen is displayed.
Trimming Recorded Clips
102
4 Select [Trim This Clip], and press the Set
button (R).
Playback of the selected clip starts.
Select Range
Deselect All
Add OK Mark...
Delete OK Mark...
FTP Upload...
Delete Clips...
Trim This Clip
A
B
.
A Guide
Operation guide
B Position bar
6 : Current position of the video
: Position to start trimming (in point)
7
: Position to end trimming (out point)
8
2
C Trimming information
W or Y
7
8
9
Memo :
The trimmed clip will be saved to the same card
0
slot as that of the original clip.
[Duration] appears in yellow if the duration is 10
0
minutes or longer. Trimming cannot be
performed in this case.
[Duration] appears in yellow if the duration is
0
longer than the recordable time on the storage
media. Trimming cannot be performed in this
case.
When trimming starts, the display switches to
0
the Media Display 2 screen.
: Indicates the available space
in the storage media (W or Y)
: Indicates the time code of the
in point
: Indicates the time code of the
out point
: Indicates the duration from the
in point to the out point
4
C
Advertisement
Table of Contents
