Adjusting The Lcd Monitor - JVC GY-HM890U Instructions Manual

Adjusting the LCD Monitor

Tilt 90 degrees downward
2
Tilt 180 degrees upward
.
1 Slide the LCD cover lock release knob to
open the LCD monitor.
2 Incline the LCD monitor to a position that
enables easy viewing.
Rotate the LCD monitor to adjust the angle.
While the LCD monitor is open, you can
0
rotate it 180 degrees upward or 90 degrees
downward.
Rotating the LCD monitor 180 degrees
0
upward enables you to see the screen from
the lens side. To display the image when it is
viewed from the opposite direction (mirror
image), perform setting as follows.
Set [Main Menu] B [LCD/VF] B [LCD Mirror]
to "Mirror" B Set button (R)
(A P120 [ LCD Mirror ] )
3 Adjust the brightness, contour, and
contrast of the LCD monitor.
You can change the angle and brightness of the
LCD monitor according to your usage condition.
Changing the brightness of the screen will not
affect the recorded images.
Adjusting the Brightness
Use the [LCD BRIGHT +/－] button to adjust the
brightness of the LCD monitor.
The [+] button brightens the monitor and the
0
[－] button darkens it.
Press the [+] and [－] buttons simultaneously
0
to return to standard settings.
During adjustment, the brightness level is
0
displayed on the LCD monitor.
.
3
1
ND 1 /64
+5 AE 6
+
0
dB
F1.6
P 13000K 1/ 100
Adjusting the Contour
Use the [LCD PEAKING +/-] button to adjust the
contour of the LCD monitor.
The [+] button increases contour correction
0
and the [－] button decreases contour
correction.
Press the [+] and [－] buttons simultaneously
0
to return to standard settings.
During adjustment, the contour level is
0
displayed on the LCD monitor.
.
Memo :
During Focus Assist operation, the contour
0
correction effect on the LCD monitor will be
temporarily disabled.
Adjusting the Contrast
Use the [LCD Contrast] menu to adjust the
contrast of the LCD monitor.
Adjust using [Main Menu] B [LCD/VF] B [LCD
0
Contrast].
Increasing the value increases the contrast.
0
[Setting Values: +10 to -10] (Default value: 0)
Adjusting the LCD Backlight
Adjust using [Main Menu] B [LCD/VF] B
0
[LCD Backlight].
(A P120 [ LCD Backlight ] )
When using the camera recorder at a bright
0
location such as one subject to outside light,
setting to "Bright" helps to ease viewing.
You can also adjust the backlight using the
0
user button assigned with the "LCD
Backlight" function.
(A P42 [Assignment of Functions to User
Buttons] )
Adjusting the LCD Monitor and Viewfinder
ND 1 /64
+5 AE 6
+
0
dB
F1.6
P 13000K 1/ 100
39