Table of Contents
Advertisement
9 Aspect Ratio
For selecting the final image aspect ratio to be used
from the overall angle of view.
[Setting Values: 16:9(+4:3), 2.35:1, R16:9, 1.75:1,
1.66:1, 14:9, 13:9, 4:3, 2.35:1 Center, 2.35:1 Top,
1.85:1 Center, 1.85:1 Top]
Memo :
When [Grid Marker] is set to "On", this item
0
appears as "---" and cannot be selected.
When [System] B [Record Set] B [Record
0
Format] B [SD Aspect] is set to "4:3", this item
is fixed at "4:3" and cannot be selected.
(A P135 [ SD Aspect ] )
9 Aspect Marker
For specifying how boundary markers are to be
used to indicate the parts of an image that are
beyond the range of the aspect ratio selected in
[Aspect Ratio].
Line+Halftone:
0
Displays the boundary using lines, and areas
outside the boundary in halftone.
Halftone:
0
Displays areas outside the boundary in halftone.
Line:
0
Displays the boundary using lines.
Off:
0
Hides the boundary markers.
[Setting Values: Line+Halftone, Halftone, Line,
ROff]
Memo :
When [Grid Marker] is set to "On", this item
0
appears as "---" and cannot be selected.
When [Aspect Ratio] is set to "16:9" or
0
"16:9(+4:3)", this item is fixed at "Off" and cannot
be selected.
9 Safety Zone
For setting the percentage of area that is to be
deemed as valid area (Safety Zone) within the
boundary of the aspect ratio selected in [Aspect
Ratio].
[Setting Values: 95%, 93%, 90%, 88%, 80%, ROff]
Memo :
When [Grid Marker] is set to "On", this item
0
appears as "---" and cannot be selected.
9 Center Mark
For specifying whether to display a mark to indicate
the screen center within the aspect ratio selected
in [Aspect Ratio].
[Setting Values: ROn, Off]
LCD/VF Menu
122
Display Settings Item
This menu is used to set the displays on the LCD
monitor and viewfinder screen.
Zoom F
For setting the display method of the zoom
position.
Number:
0
Displays the zoom position in numbers (0-99).
Bar:
0
Displays the zoom position in a bar.
Off:
0
Does not display the zoom position.
[Setting Values: Number, RBar, Off]
* If the lens attached does not support zoom
position information, "Off" is displayed and
selection is disabled.
Focus F
For setting the display method of the approximate
distance to the subject in focus during manual
focus.
Feet:
0
Displays the focus in feet.
Meter:
0
Displays the focus in meters.
Off:
0
Does not display the focal length during focus.
[Setting Values: Feet, RMeter, Off]
* If the lens attached does not support focus
position information, "Off" is displayed and
selection is disabled.
ND Filter
For setting whether to display the filter position.
On+Assist:
0
Displays the current filter position.
If the ND filter setting is inappropriate, the
appropriate ND filter to select will appear
blinking.
On:
0
Displays the current filter position.
Off:
0
Hides the filter position.
[Setting Values: On+Assist, ROn, Off]
Record Format
For setting whether to display the video format
during recording or playback.
[Setting Values: ROn, Off]
Advertisement
Table of Contents
