Table of Contents
Advertisement
Language
Switches between languages in the menu screen.
[Setting Values: REnglish, Français, Español] (U
model)
[Setting Values: REnglish, Français, Deutsch,
Italiano, Español, Pусский, 汉语] (E model)
Network
When using the network feature, set to "On(SDI
Off)" or "On(HDMI Off)".
On(SDI Off):
0
Uses the network function. However, SDI output
is disabled.
On(HDMI Off):
0
Uses the network function. However, HDMI
output is disabled.
Off:
0
Does not use the network function.
[Setting Values: On(SDI Off), On(HDMI Off), ROff]
Memo :
Restriction applies to the following functions
0
when you are using the network function.
SDI and HDMI cannot be output
0
simultaneously.
[Variable Frame Rate] cannot be selected.
0
[Flash Band Correction] is fixed at "Off".
0
[LCD + VF] is fixed at "Off".
0
9 Import Metadata
For importing metadata from the FTP server.
Memo :
This option is not available when [Network] is set
0
to "Off".
This option cannot be selected if network
0
connection is not established.
(A P174 [Preparing Network Connection] )
This option is not selectable while FTP transfer
0
is in progress.
9 Settings...
For specifying network-related settings.
(A P137 [Network/Settings Item] )
Memo :
This option is not available when [Network] is set
0
to "Off".
System Frequency
For selecting the shooting frame rate.
Set to "60/30/24" to shoot at 60p, 60i, 30p, or 24p
and to "50/25" to shoot at 50p, 50i, or 25p.
[Setting Values: 60/30/24, 50/25]
(Default values: 60/30/24 (U model), 50/25 (E
model))
Reset All
Resets all menu settings.
Memo :
[Date/Time] and [Time Zone] cannot be reset.
0
(A P131 [ Date/Time ] )
(A P131 [ Time Zone ] )
This item is not selectable when recording in
0
Camera mode, during Clip Review, and in Media
mode.
Date/Time
For setting the year, month, day, hour, and minute.
Memo :
For setting the time acquired from the GPS
0
satellite by pressing the [OIS/1] button if radio
wave reception from the GPS satellite allows for
setting of the date and time.
The [OIS/1] button is grayed out if information for
setting the date and time cannot be acquired
from the GPS satellite. l
The display order of the date (year, month, day)
0
follows the setting in [Display Settings] B [Date
Style]. However, the 24-hour format is used for
the hour display regardless of the [Time Style]
setting.
(A P124 [ Date Style ] )
Time Zone
For setting the UTC time difference in units of 30
minutes.
[Setting Values: UTC-12:00-UTC-00:30, UTC,
UTC+00:30-UTC+14:00 (in 30 min increments)]
(Default values: UTC-05:00 (U model), UTC (E
model))
Memo :
If [Date/Time] is already set, the [Date/Time]
0
item is automatically adjusted when [Time Zone]
is altered.
System Menu
131
Advertisement
Table of Contents
