Table of Contents
Advertisement
Precautions on Using the Remote Control Unit
When the switches of the camera recorder and
0
remote control unit are operated at the same
time, the switch operation of the remote control
unit takes priority over that of the camera
recorder.
Focus and zoom operations cannot be
0
performed using the remote control unit.
The shutter speed may vary slightly from the
0
value displayed on the camera recorder.
When the frame rate of the [WFrame & Bit Rate]/
0
[YFrame & Bit Rate] items on the camera
recorder is set to "24p", shutter speed cannot be
set to "1/60" from the remote control unit. The
shutter speed of "1/48" will be used even when
"1/60" is selected.
(A P133 [ W Frame & Bit Rate ] )
(A P134 [ Y Frame & Bit Rate ] )
While the camera recorder is in the Media mode,
0
the Auto White Balance feature does not
function even if you operate it from the remote
control unit.
When the H phase is set using a remote control
0
unit, only the H phase of the SD signal is
activated.
When setting the H Phase using a remote
0
control unit, any value beyond the setting range
in the menu of the camera recorder cannot be
set.
(A P126 [ HD-SDI H Phase ] )
Connecting a Remote Control Unit
165
Advertisement
Table of Contents
