Using A Battery Pack - JVC GY-HM890U Instructions Manual

Built-In Battery
The date/time and time code data are stored
0
using the built-in rechargeable battery.
When power is connected to the camera
0
recorder, the built-in battery always gets
charged. When the power is disconnected, the
battery gradually discharges.
The battery will be totally discharged if left
0
unused for 3 months and the date/time and time
code data will be reset. When this happens, set
the [POWER ON/OFF] switch to "ON" to display
the [Initial Setting] screen, then set the date/
time.
(A P34 [Initial Settings] )

Using a Battery Pack

Recommended Batteries
U model : Dionic90 (Anton/Bauer)
E model : Endura-HL9 (IDX)
* Models with an E suffix are for the European
market and the UL Listing mark is not applicable.
Caution :
Make use of the recommended batteries. Heavy
0
batteries may fall off if not used correctly.
For details on how to charge the battery, please
0
refer to the [instruction manual] of the battery in
use.
Battery Operating Time
The following are the approximate times for
continuous operation on fully-charged batteries.
Battery
Dionic90 (U model) Approx. 2.8 h
Endura-HL9 (E Approx. 2.7 h
model)
Memo :
Actual operating times may differ depending on
0
the age of the battery, charging condition, and
operating environment.
Operating time is shortened in cold
0
environment.
The operating time may shorten when power
0
zoom is used, accessories are connected, or
when the LCD monitor is frequently used.
Continuous Recording
Time (At 25 °C)
Precautions for the Battery Operation
Do not remove the battery when the [POWER
0
ON/OFF] switch is "ON".
Do not insert or remove the DC cable when the
0
battery is in use.
Leaving the camera recorder unused with the
0
battery inside will deplete the battery power
even if you set the [POWER ON/OFF] switch to
"OFF". Remove the battery if you are not using
the camera recorder.
Attaching/Detaching the Battery (U Model)
Use the Dionic90 (Anton/Bauer) battery.
1 Align the battery guide pins (x3) with the
battery adapter guide hole, and insert them
directly.
Guide Hole (x3)
Guide Pins
.
2 Slide the battery in the direction indicated
by the arrow until a "click" sound is heard.
Memo :
If the guide pins are not inserted straight, the
0
battery will not be attached correctly.
3 Detaching the Battery
Press down the release lever and slide the
battery toward you to detach it from the camera
recorder.
Release Lever
.
Battery
Power Supply
31