Table of Contents
Advertisement
Symptom
No sound during playback.
Images on the LCD monitor
and viewfinder screen appear
dark or blurred.
The [CH-1/CH-2] recording
level adjustment knob does
not work.
[CH-3/CH-4] audio is not
recorded.
SD card cannot be initialized
(formatted).
Battery alarm appears even
after loading a charged
battery.
Menu cannot be operated.
The time code and user's bit
are not displayed.
The date and time are not
displayed.
Is the currently played clip recorded in the Variable Frame Rec mode?
0
(A P93 [Variable Frame Rec] )
Readjust the brightness of the LCD monitor and viewfinder.
0
Is the [ND FILTER] switch set to "1/64"?
0
Is the iris closed?
0
Is the shutter speed setting too high?
0
Is the amount of peaking too little? Use the [PEAKING +/-] button to
0
adjust the contour for the LCD monitor and the viewfinder screen.
(A P39 [Adjusting the LCD Monitor] )
(A P40 [Adjusting the Viewfinder] )
Is the [CH-1/CH-2 AUTO/MANUAL] switch set to "AUTO"?
0
Is the [FULL AUTO] switch set to "ON"?
0
Is the [FULL AUTO] switch set to "ON", and [Camera Function] B
[FULL AUTO] B [Audio] set to "Auto"?
(A P114 [ Audio ] )
Is the number of recording channels set to "4ch"?
0
(A P133 [ W Audio ] )
(A P134 [ Y Audio ] )
Is [System] B [Record Set] B [Record Format] B [WFormat]/
0
[YFormat] set to "AVCHD"? Select a setting other than "AVCHD".
(A P133 [ W Format ] )
(A P134 [ Y Format ] )
Is the write-protect switch of the SD card turned on?
0
Make sure that the write-protect switch is turned off.
(A P43 [Write-Protect Switch on the SD Card] )
Is the battery too old?
0
Is the Menu Lock mode turned on?
0
(A P106 [About the Menu Lock Feature] )
Even in Camera mode or Media mode, the time code and user's bit
0
may not be displayed depending to the type of display.
Is [LCD/VF] B [Display Settings] B [TC/UB] set to "Off"? To display
0
the time code or user's bit, set it to "TC" or "UB".
(A P123 [ TC/UB ] )
The date and time are only displayed on the Display 1 and Display 2
0
screens in the Camera mode (during shooting).
(A P145 [Display Screen in Camera Mode] )
Is [System] B [Record Set] B [Time Stamp] set to "On"? To display
0
the date and time, set it to "Off".
(A P136 [ Time Stamp ] )
Action
Troubleshooting
207
Advertisement
Table of Contents
