Selecting Multiple Clips Consecutively - JVC GY-HM890U Instructions Manual

2 Repeat Step 1 to select multiple clips.
Multiple clips can be selected.
0
Press the [LOAD FILE/3] button while the
0
multiple clips are selected.
Appends OK mark together:
0
[Add OK Mark] B [Selected Clips]
Deletes OK mark together:
0
[Delete OK Mark] B [Selected Clips]
Uploading selected clips to the FTP server
0
together:
[FTP Upload] B [Selected Clips]
Deletes selected clips together:
0
[Delete Clips] B [Selected Clips]
Memo :
Selecting clips appended with check mark and
0
pressing the [MARKER/2] button will cancel the
selection.
If the operation is performed on multiple clips at
0
the same time, a progress bar appears. You can
stop the operation by pressing the Set button (R)
while the operation is in progress. However, it is
not possible to undo operations that are
completed.

Selecting Multiple Clips Consecutively

1 Press the [LOAD FILE/3] button.
2 Select "Select Range" in the action
selection screen, and press the Set button
(R).
Select All Clips
Select OK Marked
Select Range
Deselect All
Add OK Mark...
Delete OK Mark...
FTP Upload...
.
3 Move the cursor to the beginning (or end)
of the range for multiple selection, and
press the Set button (R).
4 Move the cursor to the other end of the
range.
Magenta check marks appear on the clips
0
within the range. (Including clips that were
already selected.)
Gray check marks appear on selected clips
0
that are outside the range.
.
5 Press the Set button (R) to confirm the
range.
The check marks change from magenta to
0
green.
Pressing the [LOAD FILE/3] button while the
0
multiple clips are selected displays the action
selection screen. The following operations
can be performed.
Appends OK mark together:
0
[Add OK Mark] B [Selected Clips]
2
Deletes OK mark together:
0
[Delete OK Mark] B [Selected Clips]
Uploading selected clips to the FTP server
0
together:
[FTP Upload] B [Selected Clips]
Deletes selected clips together:
0
[Delete Clips] B [Selected Clips]
Memo :
Selecting clips appended with check mark and
0
pressing the [MARKER/2] button will cancel the
selection.
If the operation is performed on multiple clips at
0
the same time, a progress bar appears. You can
stop the operation by pressing the Set button (R)
while the operation is in progress. However, it is
not possible to undo operations that are
completed.
Selecting and Performing Operations on Multiple Clips
Selected Range:
3
Start Position
Selected Range:
4
End Position
101