List Of Live Streaming Error Displays - JVC GY-HM890U Instructions Manual

List of Live Streaming Error Displays

The following error messages are displayed when the live streaming setting is incorrect, or when the
connection is lost during live streaming.
Error message
Invalid Address
Multicast Is Not Supported
Cannot Connect to Receiver
TCP Disconnected
Not Enough Bandwidth
Connection Timeout
Authorization Failed
Connection Error
Disconnected
Status
The IP address format is
0
incorrect.
The domain name cannot be
0
converted into the IP address.
An IP multicast address was set.
Establishment of connection with
TCP failed.
TCP connection is lost.
The communication bandwidth
0
is narrower than the average bit
rate.
The network bandwidth is
0
insufficient, and packets are
discarded.
Timeout for connection via ZIXI.
Authentication of connection via
ZIXI failed.
Connection via ZIXI failed.
ZIXI connection is lost.
Action
Enter the IP address or host
0
name of the destination
correctly.
(A P200 [Setting Distribution] )
Use an IP address that is not a
multicast address.
Ensure that the recipient's
0
device is set to TCP.
Change the Type item to
0
"MPEG2-TS/UDP".
(A P200 [Setting Distribution] )
Check to ensure that there is no
abnormality in the decoder, or
network connection device and
cables, followed by establishing the
connection again.
Lower the resolution/picture
0
quality of the video to be
distributed.
Consider switching to the use of
0
a stable network, such as wired
LAN.
Set [Destination Address] and
[Destination Port] correctly.
(A P200 [Setting Distribution] )
Set [Stream ID] and [Password]
correctly.
(A P200 [Setting Distribution] )
Check whether a different camera
with an identical stream ID is
connected.
Check whether there is abnormality
with the network connection device,
cables, etc., and try to re-establish
the connection.
Error Messages and Actions
205