Table of Contents
Advertisement
Basic Shooting
Procedures
Preparations
1
5
4
.
1 Attach the necessary accessories.
(A P28 [Settings and Adjustments Before
Use] )
2 Supply battery or AC adapter power to the
camera recorder.
(A P30 [Power Supply] )
3 Insert an SD card.
(A P43 [SD Card] )
4 Turn on the power of the camera recorder.
Setting the [POWER ON/OFF] switch to "ON"
starts up the camera recorder in the Camera
mode to enable shooting.
5 Adjust the angle of the LCD monitor and
viewfinder.
(A P38 [Adjusting the LCD Monitor and
Viewfinder] )
Shooting
1 Configure the video and audio input
settings.
You have to configure video settings such as
brightness adjustment (iris, gain, shutter) and
white balance adjustment in order to start
shooting. You also have to adjust the audio
input settings and audio recording level for
audio recording.
Adjusting the Brightness
0
(A P57 [Adjusting the Brightness] )
Adjusting the White Balance
0
(A P63 [Adjusting the White Balance] )
Adjusting Audio Input Settings and
0
Recording Level
(A P69 [Audio Recording] )
2 Press the [REC] button to start recording to
3
Memo :
0
2
0
3 Check the most recently captured images.
the SD card.
This camera recorder has three [REC] buttons.
Any of the [REC] buttons can be used to start/
stop recording by default.
The front and back tally lamps light up in red
during recording.
Zoom Operation
0
(A P52 [Zoom Operation] )
Adjusting the Focus Manually
0
(A P53 [Focus Operation F] )
If both the slots are loaded with recordable cards
in the factory default, pressing the [REC] button
starts recording only to the media in the selected
slot.
When [Main Menu] B [System] B [Record Set]
B [Slot Mode] is set to "Dual", recording can be
performed simultaneously to the cards in both
the slots.
(A P85 [Dual Rec] )
The tally lamps can be turned off in the [System]
B [Front Tally]/[Back Tally] menu.
(A P130 [Front Tally/Back Tally] )
Press the user button assigned with the [Clip
0
Review] function to activate the Clip Review
function. The most recently captured images
are played back on the LCD monitor and
viewfinder screen.
After playback, the camera recorder returns
0
to standby mode (STBY).
(A P83 [Viewing Recorded Videos
Immediately (Clip Review)] )
Basic Shooting Procedures
49
Advertisement
Table of Contents
