Trimming Recorded Clips - JVC Connected Cam GY-HC550U Instructions Manual

Trimming Recorded Clips

It is possible to crop (trim) the necessary parts of a
clip that is recorded to the recording media.
The trimmed clip is saved as a separate file to the
recording media and the original clip remains
intact.
1 Switch to Media mode.
Switch the mode using the [MODE] selection
button on the side operation panel.
2 Move the cursor to the clip to be trimmed.
Move the cursor to the clip to be trimmed using
the cross-shaped button (JKH I).
.
3 Press the [ONLINE/3] button.
The action selection screen is displayed.
4 Select [Trim This Clip], and press the Set
button (R).
Playback of the selected clip starts.
Select Range
Deselect All
Add OK Mark...
Delete OK Mark...
FTP Upload...
Delete Clips...
Trim This Clip
282min 1000/2000
3840x2160
30p 140M
A
IN
OUT
TRIM
4030 20 10 0
B
.
A Guide
Operation guide
B Position bar
6 : Current position of the video
: Position to start trimming (in point)
7
: Position to end trimming (out point)
8
106
Trimming Recorded Clips
2
4
00: 00: 00.00
Jan 24 , 2019
12 :34 : 56
0
30min
C
11: 22: 33.00
11: 23: 44.00
00: 08: 22
C Trimming information
W or Y : Indicates the available space in
the storage media (W or Y)
: Indicates the time code of the in
7
point
: Indicates the time code of the out
8
point
: Indicates the duration from the in
9
point to the out point
Memo :
The trimmed clip will be saved to the same card
0
slot as that of the original clip.
[Duration] appears in yellow if the duration is 10
0
minutes or longer. Trimming cannot be
performed in this case.
When [System] B [Record Set] B [Record
0
Format] B [WFrame Rate] is set to "
70M (XHQ)", [Duration] appears in yellow if the
duration is 6 minutes or longer. Trimming
cannot be performed in this case.
When [System] B [Record Set] B [Record
0
Format] B [System] is configured to "4K EXT
(SSD)" or "4K", [Duration] appears in yellow if
it is 3 minutes or longer. Trimming cannot be
performed in this case.
[Duration] appears in yellow if the duration is
0
longer than the recordable time on the storage
media. Trimming cannot be performed in this
case.
When trimming starts, the display switches to
0
the Media Display screen.
5 Specify the in point.
Operate buttons such as H/I or J/K to move
0
the video to the in point.
(A P100 [Playing back] )
Specify the in point by pressing the [FOCUS
0
ASSIST/1] button at the point you want to
start trimming.
6 Specify the out point.
Operate buttons such as H/I or J/K to move
0
the video to the out point.
(A P100 [Playing back] )
Specify the out point by pressing the [OIS/2]
0
button at the point you want to end trimming.
7 Perform trimming.
Press the [ONLINE/3] button to perform
trimming.
Memo :
While trimming is in progress, you can press the
0
[CANCEL] button to return to the thumbnail
screen.
When trimming the in and out point, the in point
0
trimmed may be up to one second before the
specified in point and the out point trimmed may
be up to one second behind the specified out
point.