Table of Contents
Advertisement
Return Input A B
For selecting the input destination of the return
video.
SDI:
0
Inputs return video from the [HD/SD SDI IN]
terminal on the side.
Adapter:
0
Inputs return video from the adapter connected
to the accessory connection terminal (68 pins)
on the rear of the camera recorder.
Studio:
0
Inputs return video from studio adapter
connected to the [STUDIO] terminal on the side.
[Setting Values: SDI, RAdapter, Studio]
Memo :
If this item is set to "SDI", the setting for [Camera
0
Function] B [User Switch Set] B [Return Video]
is fixed at "Camera R Return".
Return Aspect A B
For selecting the aspect ratio of the return video.
16:9:
0
Select this option if the return video is a squeeze
signal.
4:3:
0
Select this option if the return video is a 4:3
aspect signal (including Letter Box).
[Setting Values: R16:9, 4:3]
Audio Set Item
Input1 Mic Ref.
For setting the reference input level when the
[INPUT1] selection switch is set to "MIC" or "MIC
+48V".
[Setting Values: -60dB, R -50dB, -40dB, -30dB]
Input2 Mic Ref.
For setting the reference input level when the
[INPUT2] selection switch is set to "MIC" or "MIC
+48V".
[Setting Values: -60dB, R -50dB, -40dB, -30dB]
AUX Gain
For setting the sensitivity of the [AUX] input
terminal.
[Setting Values: +12dB, +6dB, R0dB, -6dB, -12dB]
CH3/4 Input Level
For setting the mode and level of input to [CH-3]
and [CH-4].
(A P71 [For CH-3/CH-4] )
CH1/2 Ref. Level
For setting the reference recording level of [CH-1]
and [CH-2]. (Applies to both [CH-1] and [CH-2].)
[Setting Values: -12dB, -18dB, R-20dB]
CH3/4 Ref. Level
For setting the reference recording level of [CH-3]
and [CH-4]. (Applies to both [CH-3] and [CH-4].)
CH1/2 -12dB:
0
Sets to a value that is 12dB lower than that of
[CH-1] and [CH-2].
CH1/2 -6dB:
0
Sets to a value that is 6dB lower than that of
[CH-1] and [CH-2].
CH1/2 Link:
0
Sets to the same value as [CH-1] and [CH-2].
[Setting Values: CH1/2 -12dB, CH1/2 -6dB,
RCH1/2 Link]
A/V Set Menu
127
Advertisement
Table of Contents
