Setting Distribution; Starting Distribution - JVC GY-HM890U Instructions Manual

Setting Distribution

1 Set the [Record Format] according to the
resolution and frame rate of the video to be
distributed.
1920x1080
60i,30p 60i
1920x
1080
50i,25p 50i
60i 60i
1440x
1080
50i 50i
60p,30p
1280x
720
50p,25p
720x480
60i
(U model)
720x576
50i
(E model)
.
* This item cannot be selected when [Main Menu]
B [System] B [Record Set] B [Record Format]
B [System] is set to "HD(SDI In)".
Memo :
Live streaming cannot be performed in the
0
following cases.
When [Main Menu] B [System] B [Record
0
Set] B [Record Format] B [System] is set to
"HD+SD" or "HD+Web"
When [Main Menu] B [System] B [Record
0
Set] B [Record Format] B [WFrame & Bit
Rate] is set to "24p"
2 Set the Resolution and Frame & Bit Rate for
the video to be distributed.
Specify the settings in [Main Menu] B [System]
B [Network]/[Settings] B [Live Streaming Set].
(A P137 [ Live Streaming Set ] )
3 Set the distribution protocol.
Specify the settings in [Main Menu] B [System]
B [Network]/[Settings] B [Live Streaming Set]
B [Type].
(A P139 [ Type ] )
Performing Live Streaming
200
Settable Resolution during
Streaming/No. of Frames
720x480
1280x720 480x270
720x576
30p(*) 60i 30p
25p(*) 50i 25p
30p(*) 60i 30p
25p(*) 50i 25p
30p 60i 30p
25p 50i 25p
60i 30p
50i 25p
4 Set items related to the distribution
protocol.
Set each of the [Main Menu] B [System] B
[Network]/[Settings] B [Live Streaming Set] B
[UDP/TCP Settings]/[RTSP/RTP Settings]/
[ZIXI Settings] items.
(A P139 [ UDP/TCP Settings ] )
(A P139 [ RTSP/RTP Settings ] )
(A P139 [ ZIXI Settings ] )

Starting Distribution

1 Perform the necessary settings for the
decoder device or the PC application.
For details on the settings, please refer to the
"INSTRUCTIONS" of the respective devices
and applications.
Memo :
If there is an NAT router within the
0
communication path between the camera and
the decoder, port forwarding setup is required.
For details on the settings, please refer to the
"INSTRUCTIONS" of the router in use.
The following parameters are required when
0
connecting to this camera recorder using the
RTSP/RTP.
Port number: 554
Stream ID: stream
Use the following to access via URL.
0
rtsp://<IP address of the camera recorder>:554/
stream
2 With the network connection established,
set [Live Streaming] to "On".
(A P174 [Preparing Network Connection] )
Set [Main Menu] B [System] B [Network]/
0
[Settings] B [Live Streaming Set] B [Live
Streaming] to "On".
The network connection mark appears on the
0
display screen when a network connection is
established.
282min
100min
50min
1920x1080
60 i HQ
.
00: 00: 00.00
Jan 24,2014
12 :34 :56
5 . 6f t
ND 1 /64
AE 6
+
0
dB
F1. 6
P 13000K 1/ 100