GE Voluson 730Expert Service Manual page 261

GE H - K
EALTHCARE RETZTECHNIK
D 105899, R
IRECTION EVISION
Section 8-10
Replacement of the Monitor Task Lamp
8-10-1 Manpower
One person, 15 min.
8-10-2 Tools
Philips screwdriver 1 and 2, stubby (length ~30mm)
8-10-3 Preparations
1.) Power Off/Shutdown the system; see:
8-10-4 Task Lamp - Removal Procedure
1.) Use the stubby screwdriver and unscrew the 2 screws, which fixes the cover of the task lamp.
2.) Screw out the task lamp and remove it.
8-10-5 Task Lamp - Installation Procedure
1.) Screw in the new task lamp into the lamp socket.
2.) Mount the cover of the task lamp and fix it with the 2 screws.
3 DRAFT (A
Figure 8-28 remove cover of the task lamp
Chapter 8 - Replacement Procedures
29, 2008)
PRIL
Section 4-3-2 on page
V ® 730E
OLUSON XPERT
S
ERVICE
4-3.
task lamp
(BT03)
M
ANUAL
8-21