Table of Contents
Advertisement
System setting state
[REC FORMAT]
60P
60i
Following [UBG MODE]*
50P
50i
30P
24P
Following [UBG MODE].*
25P
* With [EXT], UB of the <TC IN> terminal is slaved.
User bits settings
Set LTC UB in the main menu → [REC/PB] → [TC/UB] → [UBG MODE], and set VITC UB in the main menu → [REC/PB] → [TC/UB] → [VITC UBG
MODE].
Item name
[USER]
Records internal user values. User values can be entered on the status display. Setting values are held even when the power is
(only [UBG MODE])
turned off.
For details, refer to "How to input user bits" (page 95).
[USER/EXT]
Records internal user values as VITC UB.
(only [VITC UBG MODE])
Same value as the user bit that is displayed when [UBG MODE] is set to [USER] or [EXT].
[TIME]
Records the time measured by the internal clock.
[DATE]
Records the hour digit of year/month/day/date-time measured by the internal clock.
[EXT]
Records the user bit values currently input to the <TC IN> terminal. User values held internally also change this input value.
(only [UBG MODE])
[TCG]
Records the time code value.
[FRAME RATE]
Records the camera shooting frame rate information. When playing back clips recorded in native format, the same frame rate
information as VITC UB is output regardless of the recorded value.
Use the camera at this setting when the editing device such as a computer uses the frame rate information of the user bits.
[REGEN]
Reads the user bit last recorded to P2 card that is currently to be recorded to and recording this value as it is.
How to input user bits
By setting user bits, information such as memos (date, time) up to eight digits long (hexadecimal) can be recorded.
a: <DISPLAY> switch
b: Cursor buttons (`/{/Y/I)
c: <TCG> switch
1
Set the <DISPLAY> switch to <UB>.
2
Set the <TCG> switch to <SET>.
3
Set the user bits by the cursor buttons.
f Screen display
- I: The digit to be set (flashing) moves to the right.
- Y: The digit to be set (flashing) moves to the left.
- `: The value of the digit to set (flashing) is incremented by one.
- {: The value of the digit to set (flashing) is decremented by one.
4
Set the <TCG> switch to <F-RUN> or <R-RUN>.
5
Set [USER] in the main menu → [REC/PB] → [TC/UB] → [UBG MODE].
For details, refer to "Setting menu basic operations" (page 153).
Chapter 4 Shooting — Setting the time data
Recording UB
LTC UB
VITC UB
Following [VITC UBG
MODE]
(However, frame
information is fixed at
[720P]*)
Frame information is
fixed.
<TC OUT> terminal UB
LTC UB is output.
LTC UB is output.
Description
a
b
c
– 95 –
Output UB
LTC UB for HD SDI
VITC UB for HD SDI
LTC UB is output.
VITC UB is output.
(No recording in [480i]
(No recording in [480i]
and [576i])
and [576i])
LTC UB is output.
VITC UB is output.
Advertisement
Table of Contents
