Table of Contents
Advertisement
Item
[REC FORMAT]
[AUDIO SMPL RES]
[REC SIGNAL]
[ASPECT]
[SCAN REVERSE]
[COMPRESSION MODE]
@
NOTE
t If [LINE&FREQ] or [REC FORMAT] is changed, the set pre-recording time value (main menu → [REC/PB] → [REC FUNCTION] → [PRE REC TIME])
may also be changed accordingly. The range that can be set for pre-recording time differs depending on the settings in [LINE&FREQ] and [REC
FORMAT]. If the pre-recording time exceeds the limit that can be set after changing the setting in [LINE&FREQ] or [REC FORMAT], the maximum limit
value will be set.
[SYSTEM SETUP]
Item
[SETUP(7.5%)]
[GPS]
Chapter 6 Menu Operations — Menu list
Selects the codec for recording and the mode for shooting and recording.
[AVC-I200/60P], [AVC-I200/60i], [AVC-I200/50P], [AVC-I200/50i], [AVC-I200/30PN], [AVC-I200/24PN],
[AVC-I200/25PN], [AVC-I100/60P], [AVC-I100/60i], [AVC-I100/50P], [AVC-I100/50i], [AVC-I100/30PN],
[AVC-I100/24PN], [AVC-I100/25PN], [AVC-I50/60i], [AVC-I50/50P], [AVC-I50/50i], [AVC-G50/60P],
[AVC-G50/60i], [AVC-G50/50P], [AVC-G50/50i], [AVC-G50/30PN], [AVC-G50/24PN], [AVC-G50/25PN],
[AVC-G25/60P], [AVC-G25/60i], [AVC-G25/50P], [AVC-G25/50i], [AVC-G25/30PN], [AVC-G25/24PN],
[AVC-G25/25PN], [AVC-G12/60P], [AVC-G12/60i], [AVC-G12/50P], [AVC-G12/50i], [AVC-G12/30PN],
[AVC-G12/24PN], [AVC-G12/25PN], [DVCPRO HD/60P], [DVCPRO HD/60i], [DVCPRO HD/50P],
[DVCPRO HD/50i], [DVCPRO50/60i], [DVCPRO50/50i], [DVCPRO/60i], [DVCPRO/50i], [DV/60i],
[DV/50i]
The AVC-LongG format cannot be selected in the following cases:
f When the main menu → [REC/PB] → [REC FUNCTION] → [RECORDING] is set to [INTERVAL] or [ONE
SHOT].
Types of available codecs vary depending on the setting of [LINE&FREQ]. For details, refer to "Multi
formats" (page 79).
If the recording format is AVC-Intra 100/AVC-Intra 50, selects number of the audio recording quantizing
bits.
[16BIT]: 16-bit is the audio recording bit quantity.
[24BIT]: 24-bit is the audio recording bit quantity.
f Factory setting: [16BIT]
When the recording format is AVC-LongG 50 or AVC-LongG 25, select [24BIT]. When the recording format
is DVCPRO HD, DVCPRO50, DVCPRO, or DV, select [16BIT].
Clips recorded at 24-bit should be played back using a 24-bit compatible P2 device or P2 Viewer Plus.
The clip numbers of P2 devices that are not 24-bit compatible are displayed in red and cannot be used for
playback. Audio does not play back correctly on a P2 Viewer that is not 24-bit compatible. Always use the
latest P2 Viewer Plus version.
For 24-bit compatible P2 devices and the latest P2 Viewer Plus information, visit the P2 support page on
the following website.
https://pro-av.panasonic.net/
Switches the video input signal.
[CAM]: Records signals from the camera.
[SDI]: Records input from the <SDI IN> terminal.
f Factory setting: [CAM]
Once the power is turned off, it is always set to [CAM] the next time power is turned on.
Selects the aspect ratio to record. (Only in SD)
[16:9]: Records using the 16:9 aspect ratio.
[4:3]: Records using the 4:3 aspect ratio.
f Factory setting: [16:9]
Sets whether to use function to correct video when using an anamorphic lens or film lens.
[ON]: Corrects video. Inverts the top, bottom, left and right sides of a video.
[OFF]: Does not correct video.
f Factory setting: [OFF]
Selects how to compress video when recording.
[NORMAL]: Records in standard compression mode.
[DARK]: Records by reducing image distortions caused by compression generated in portions of approx.
10IRE (70 mV) or darker.
f Factory setting: [NORMAL]
This setting is enabled when recording in DVCPRO HD 720P mode.
Switches the setup.
[ON]: Setup 7.5% is on.
[OFF]: Setup 7.5% is off.
f Factory setting: [ON]
Sets the GPS.
Acquired position information is recorded in the shooting location of the metadata. The position information
is not recorded in the metadata if the position information cannot be acquired.
[INTERNAL]: Activates the built-in GPS. The signal of the position information is output to the <SDI
OUT1> terminal and the <SDI OUT2> terminal.
[EXTERNAL]: Acquires the position information from the external device connected to the camera via
network.
[OFF]: Does not activate the GPS. Does not output and record the location information.
f Factory setting: [OFF]
– 196 –
Description of settings
Description of settings
Advertisement
Table of Contents
