Table of Contents
Advertisement
Item
[FRONT MIC LEVEL]
[REAR MIC CH1/3 LVL]
[REAR MIC CH2/4 LVL]
[REAR LINE IN LVL]
[AUDIO OUT LVL]
[HEADROOM]
[WIRELESS WARN]
[WIRELESS TYPE]
[USB/LAN]
[4G/LTE PROPERTY] cannot be selected when the setting is not required on the connected 4G/LTE USB modem.
Item
[USB MODE SELECT]
[USB MODE]
[NETWORK SEL]
[NETWORK FUNC]
[HTTP SERVER]
[PLAYLIST]
[IP REMOTE]
[USER ACCOUNT]
[ACCOUNT LIST]
Chapter 6 Menu Operations — Menu list
Selects the front microphone input level.
[−40dB], [−50dB]
f Factory setting: [−40dB]
Selects the rear microphone input level.
[−50dB], [−60dB]
f Factory setting: [−60dB]
Selects the rear microphone input level.
[−50dB], [−60dB]
f Factory setting: [−60dB]
Selects the rear line input level.
[−3dB], [0dB], [4dB]
f Factory setting: [4dB]
Selects the audio output level.
[−3dB], [0dB], [4dB]
f Factory setting: [4dB]
Sets the headroom (standard level).
[18dB], [20dB]
f Factory setting: [20dB]
Sets whether to display a warning when the reception status of the wireless microphone receiver is poor.
[ON], [OFF]
f Factory setting: [OFF]
Selects the type of wireless microphone receiver.
[SINGLE]: Selects a single channel type wireless microphone receiver.
[DUAL]: Selects a double channel type wireless microphone receiver.
f Factory setting: [SINGLE]
Sets the camera operation mode when an external device is connected to the USB.
[STORAGE]: Sets the mode to be used with connected devices such as an external hard disk drive.
[DEVICE]: Selects the USB device mode for using P2 cards as mass storage, using computers or other
devices connected via USB 2.0.
f Factory setting: [STORAGE]
This item cannot be changed when [USB MODE] is set to [ON].
Turns operation of the mode selected in [USB MODE SELECT] [ON]/[OFF].
[ON], [OFF]
f Factory setting: [OFF]
Once the power is turned off, it is always set to [OFF] the next time power is turned on.
When [DEVICE] is selected for [USB MODE SELECT] and [USB MODE] is set to [ON] (in USB device
mode), the menu cannot be opened. In this case, you can exit the USB device mode (return to [OFF]) by
pressing the <EXIT> mode.
For details, refer to "Connecting to a computer in the USB device mode" (page 218).
The setting cannot be changed while the thumbnail screen is displayed.
Sets the connection method when connecting the camera with an external device (such as a computer) via
network.
[WLAN]: Connects via wireless LAN.
[4G/LTE]: Connects via 3G/4G/LTE.
[LAN]: Connects via the <LAN> terminal.
[OFF]: Does not connect.
f Factory setting: [OFF]
Configures the settings regarding the HTTP server function.
[BROWSE]: Enables the P2 browser function.
[BROWSE (+CTRL)]: Enables the HTTP server function, starting and stopping recording at the terminal
side, and preset control of time code or user bits.
[DISABLE]: Disables the HTTP server function.
f Factory setting: [DISABLE]
Sets entering/exiting of the playlist edit mode.
[ON], [OFF]
f Factory setting: [OFF]
[ENABLE]: Enables remote control with IP connection.
[DISABLE]: Disables remote control with IP connection.
f Factory setting: [DISABLE]
Some functions can be remote controlled from the remote operation panel AK-HRP200G (optional)
connected via IP. For details, refer to "Connecting to Remote operation panel (AK-HRP200G)"
(page 222).
When [ENABLE] is selected, remote control from the extension control unit (AG-EC4G) or the remote
operation panel AK-HRP200G (optional) connected to the <REMOTE> terminal is disabled.
Sets the user account name.
Displays the currently set account name. Registering of new accounts, deleting accounts, or changing
password can also be performed.
– 187 –
Description of settings
Description of settings
Advertisement
Table of Contents
