Table of Contents
Advertisement
Warning and status display section
1 <DISPLAY SELECT> button
Switches the display of the LCD monitor. Press the <DISPLAY SELECT> button to switch between the image or thumbnail display and the status
display.
2 <BACKLIGHT> button
Controls the brightness of the LCD monitor.
Every press of the button adjusts the brightness.
@
NOTE
t This setting is linked to setting of the main menu → [I/F SETUP] → [LCD MONITOR] → [BACKLIGHT]. The operation of the <BACKLIGHT> button
is disabled while [BACKLIGHT] of the menu is set.
3 <WARNING> lamp (page 247)
Starts flashing or is illuminated if something unusual occurs in the memory.
4 <USB> lamp
Lights when the camera is in the USB mode.
5 Back tally switch
Controls the action of the back and rear tally lamps.
<ON>
Enables the back and rear tally lamps.
<OFF>
Disables the back and rear tally lamps.
6 Back tally lamp
When the back tally switch is set to <ON>, the lamp acts in the same way as the front tally lamp at the viewfinder.
7 Rear tally lamp
When the back tally switch is set to <ON>, the lamp acts in the same way as the back tally lamp.
Chapter 2 Description of Parts — Warning and status display section
1
2
3
4
7
– 28 –
5
6
Advertisement
Table of Contents
