[Clip] - Panasonic AJ-PX5100G Operating Instructions Manual

[USER SW GAIN]
Item
[S.GAIN]
[DS.GAIN]
[LENS/IRIS]
Item
[A.IRIS LEVEL]
[A.IRIS PEAK/AVE]
[A.IRIS WINDOW]
[S.IRIS LEVEL]
[IRIS GAIN]
[IRIS GAIN VALUE]
[AGC]
Item
[AGC]
[AGC LIMIT]
[AGC POINT]

[CLIP]

These items are used when performing various tasks, such as playing back, deleting, and copying clips, and editing metadata, while checking the
thumbnail of the clips displayed in the LCD monitor.
This menu item is enabled when the thumbnail screen is displayed.
Clip operations such as [DELETE] or [COPY] are enabled when the target thumbnail is selected.
Some items are displayed only in specific situations such as in USB storage mode or on the explorer screen.
[PROPERTY]
Item
[CLIP PROPERTY]
[CARD STATUS]
[CPS PASSWORD]
[SD CARD]
Chapter 6 Menu Operations — Menu list
Selects the gain to enable to the <SUPER GAIN> switch (<USER> button).
[30dB], [36dB], [42dB]
Set to be valid/invalid per gain value. All gain values are valid in the factory settings.
Selects the accumulated gain to enable to the <DS.GAIN> switch (<USER> button).
[6dB], [10dB], [12dB], [15dB], [20dB], [24dB], [28dB], [34dB]
Set to be valid/invalid per gain value. The gain value of [20dB] or lower is valid in the factory setting.
When [DS.GAIN] function is operating, the shutter mode is [OFF].
Sets the auto iris target value.
[0]...[100]
f Factory setting: [50]
Sets the ratio included in the peak for auto iris standard.
Larger ratios correspond to a peak within the IRIS detection window, and smaller ones correspond to
average values within the IRIS detection window.
[0]...[100]
f Factory setting: [30]
Selects the auto iris detection window.
[NORM1]: Window that is near screen center.
[NORM2]: Window that is near screen bottom.
[CENTER]: Window that is a spot in the screen center.
f Factory setting: [NORM1]
Sets the super iris (backlight compensation) target value.
[0]...[100]
f Factory setting: [70]
Selects the IRIS GAIN adjustment side.
[CAM], [LENS]
f Factory setting: [LENS]
When using the lenses with extenders (such as x2 and x0.8) sold prior to the FUJINON DIGI POWER
types, set to [LENS] with the extender inserted, and operate IRIS correction control. If set to [CAM], the
IRIS control of the camera will no longer function correctly.
Selects the [IRIS GAIN] adjustment value.
When [CAM] is selected in [IRIS GAIN], this setting is enabled.
[1]...[20]
f Factory setting: [10]
Selects [ON]/[OFF] for [AGC] function that automatically adjusts camera gain.
[ON], [OFF]
f Factory setting: [OFF]
Sets the maximum gain value during [AGC] operation.
[3dB], [6dB], [12dB], [18dB]
f Factory setting: [12dB]
Sets the F value to switch control to [AGC] from auto iris during [AGC] operation.
[F5.6], [F4.0], [F2.8]
f Factory setting: [F2.8]
Detailed clip information is displayed on the screen. Items can be individually corrected. For details, refer
to "Properties" (page 140).
Displays the card status of a card slot. For details, refer to "Thumbnail screen" (page 128).
Sets the CPS encrypted password of the microP2 memory card.
[LOAD]: Loads CPS password from an SD memory card.
[SET]: Enters the CPS password.
[DELETE]: Deletes the password saved to the device, and disables encrypted formats.
Displays SD memory card information.
– 174 –
Description of settings
Description of settings
Description of settings
Description of settings