Panasonic AJ-PX5100G Operating Instructions Manual page 39

@
NOTE
t Up to 32 files can be loaded to the camera.
To load a new file, delete any file before loading the new file.
For details, refer to "Deleting the chromatic aberration compensation file from the camera" (page 39).
Deleting the chromatic aberration compensation file from the camera
1
Set [OFF] in the main menu → [MAINTENANCE] → [CAC ADJ.] → [CAC CONTROL].
2
At [LIST/DELETE], use the jog dial button (or <SET> button) to select the lens model number to delete.
The confirmation screen is displayed.
3
Select [YES], and press the jog dial button (or <SET> button).
The file is deleted.
When the chromatic aberration compensation data is not functioning properly
When the chromatic aberration compensation function is not functioning properly, or when the chromatic aberration compensation data could not be
loaded normally, the viewfinder displays an error message.
Error message
[CAC FILE DATA NOT FOUND]
[CAC LENS DATA INVALID]
[LENS INIT. NOT COMPLETED]
@
NOTE
t When mounting lens optical system accessories (converter lens attachments), the chromatic aberration compensation function sometimes does not
function properly since the optical characteristics of the lens change. In this case, set the chromatic aberration compensation function to [OFF].
t When a focus servo is used on CANON lenses, enable recording after initialization is completed in the automatic initialization mode. Data is
sometimes recording while the focus ring is moving.
t When an error message is also not displayed while the chromatic aberration compensation function is not functioning, the software version of the lens
might be old. Contact the manufacturer of the lens you are using.
Chapter 3 Preparation — Mounting and adjusting the lens
Meaning
There is no chromatic aberration compensation data
matching the connected lens when the chromatic
aberration compensation function is [ON].
This is displayed when the camera is turned on.
The response data from the lens is not supported, or the
response contains information other than that defined in
the chromatic aberration compensation data.
Position detection (focus zoom) of the lens is encoder
type, and initialization is not completed.
– 39 –
Remedy
Load chromatic aberration compensation data matching
the connected lens to the camera.
The lens is not a lens compatible with the chromatic
aberration compensation function.
The chromatic aberration compensation will not function,
but will not cause any problems in use.
Turn the focus/zoom ring to pass through the center of
the operating range.